36
17. Pulse the Upper Bead Breaker switch down in small
increments and the Lower Bead Breaker control up as the
tire rotates to begin to break both the Upper and Lower
Beads.
18. Stop the rotation of the Turntable.
19. Use the Center Post Control and bring the Turntable
Assembly closer to Bead Breaker Rollers.
(See Fig. 11.16)
20. Press DOWN on the rotate pedal to rotate the
Turntable clockwise.
21. Keep moving the Upper Bead Breaker Roller Down
until the Upper Bead is into the Rim’s drop Center.
(See Fig. 11.17)
22. Pulse the Upper Bead Breaker switch down in small
increments and the Lower Bead Breaker control up as
the tire rotates to complete breaking both the Upper and
Lower Beads. (See Fig. 11.18 - 11.19)
23. Use the Center Post Control and bring the Turntable
Assembly back so the rim edge is 1/4” away from the
Bead Breaker Rollers.
24. Raise the Upper Bead Breaker Roller out of the way.
(See Fig. 11.20)
Fig. 11.16
Fig. 11.17
Fig. 11.19
Fig. 11.18
Fig. 11.20
Summary of Contents for RX3040
