53
t
The vertical and horizontal slides and the helper slides
should be cleaned with a vaporizing solvent and then
lubricated with chassis grease once a month.
(See Fig. 17.1 - 17.3)
t
The table top, steel Tool Head, and other working
surfaces should be cleaned with a vaporizing solvent every
month.
SEMI ANNUALLY
t
Every six months add about 250g of 26 weight gear oil
to the gearbox.
ANNUALLY
t
Replace hydraulic fluid annually with AW32 hydraulic
fluid; use a clean funnel to refill fluid.
t
Check the level of oil in the reduction gearbox and refill
with 26 weight gear oil.
t
Check and adjust the tension of turntable drive belt.
See page 57.
t
All air mufflers should be disassembled and cleaned
with solvent every three months.
Fig. 17.1
Fig. 17.2
Fig. 17.3
Summary of Contents for RX3040
