Both the Upper and Lower Bead Breaker Rollers can
articulate while breaking the tire bead by applying pres-
sure closer to the Rim Edge.
Only the Lower Bead Breaker Roller can be locked
when using the Lower Bead Breaker Roller to help lift the
lower bead over the upper rim edge. Pushing the
Locking Pin locks the Lower Roller. Pulling the Locking
Pin out allows the Lower Roller to articulate.
Locking / Unlocking the
Lower Bead Breaker Roller
1. When using the Lower Bead Breaker Roller to Break
the Lower Bead, unlock the Roller, by pulling the Locking
Pin out. The Lower Roller will articulate and push directly
on the lower bead to break the Lower Bead.
2. When using the Lower Bead Breaker Roller to push
the Lower Bead up off the Upper Rim, lock the Roller by
pushing the Lock Pin in.
3. Locking the Lower Bead Breaker Roller will prevent
the Roller from articulating and hitting /damaging the Rim
or Roller.
NOTE:
The Tool Head may need to be extended beyond the
“Target Lock” position during demounting of some
tire/rim combos. In that extended position, use caution
be very aware of where the Tool Head is in relation to the
rim. The rim or tire can be damaged if care is not taken in
knowing where the tool head is at all time.
Use the Video assist feature and direct viewing to
verify the Tool Head’s location before initiating
movement of the Tool Head
PRACTICE, PRACTICE, PRACTICE!
Time spent practicing on inexpensive steel wheel/ tire
combos before beginning work on a valuable rim or tire,
will prevent costly damage. Take the time to get used
to the controls and operation of the machine
BEFORE
working on customers valuable rims and tires.
BendPak / Ranger, 1645 Lemonwood Dr., Santa Paula, CA. 93060 Tel: 1-805-933-9970 Fax: 1-805-933-9160
REFER TO THE COMPLETE SAFETY, INSTALLATION AND OPERATION MANUAL IF YOU ARE UNSURE OF ANY
TIRE MOUNTING OR DEMOUNTING PROCEDURES OR HAVE NOT USED THIS STYLE OF TIRE CHANGER.
QUICK START SETUP GUIDE - Demounting
REV A 10-19-10
