For technical support, contact us at 1-800-565-5321
3068-DL Installation Guide
| REV. D2 | Page
6
PHASE 2
– INSTALLATION
2.1 TIPS ON HOW TO ATTACH A PLUSNUT
FORWARD
REVERSE
TIPS:
Put the plusnut on the plusnut gun, then attach the plusnut in the hole by turning the gun forward until the
plusnut locks, then remove the gun by turning in reverse.
2.1.1
Attach the plusnut using the plusnut gun.
2.1.2
Attach the plusnut using the 6490 plusnut tool.
6490
HARDWARE USED
Flat washer 1/4"
Flat washer 1/4" BS × 3/4" OD
TOOLS
q
Cordless Impact
q
7/16" Socket
q
9/16" Wrench
TIPS STEP 1:
Assemble the 6490 plusnut tool with the hardware needed,
plusnut and the 9/16" wrench as shown.
FORWARD
REVERSE
TIPS STEP 2:
Attach the plusnut in the hole by turning
the bolt forward using an impact with a
7/16" socket until the plusnut locks, then
remove the bolt by turning the impact in
reverse.
NOTE:
The hardware used for the 6490 plusnut tool is not included in the fastener bag.
The 6490 plusnut tool can be ordered separately upon demand at no charge.
