R76 Series of Tire Changers
48
P/N 5900346 — Rev. C — Dec. 2019
13.
If using the R76LT, position the Assist Tool, if desired, to the left of the Mount/Demount Head
(about 20% of the total distance around the Tire), with it pushing down on the Sidewall of the Tire.
Then position the Bead Roller, if desired, to the left of the Mount/Demount Head, with it also
pushing down on the Sidewall of the Tire.
Top view. Not necessarily to scale.
When you start rotating the Tire, the Assist Tool, if used, moves with the Tire. The Bead Roller, if
used, stays in the same spot.
14.
Press down and hold down the Turntable Foot Pedal to move the Turntable clockwise.
If using the Bead Lifting Tool or Assist Tool to hold down the Sidewall, move them around with the
Tire as it rotates.
15.
If you run into any difficulty as the Tire rotates, take your foot off the Turntable Foot Pedal to stop
the Turntable, then press up on the Turntable Foot Pedal to move the Turntable counterclockwise.
Make any necessary adjustments and then proceed.
Eventually the top Bead slips under the Rim. How long this takes can vary, based on the Tire you
are mounting. Some Tires are more difficult than others.
⚠
CAUTION
Do not use excessive force
. If the Turntable slows and then stops while
you are holding down the Turntable Foot Pedal, do not try to force it to
continue. Using excessive force can damage the Tire, Wheel, or the Tire
Changer and voids the Warranty.
Summary of Contents for R76LT
Page 58: ...R76 Series of Tire Changers 58 P N 5900346 Rev C Dec 2019 Labels...
Page 59: ...R76 Series of Tire Changers 59 P N 5900346 Rev C Dec 2019...
Page 87: ...R76 Series of Tire Changers 87 P N 5900346 Rev C Dec 2019 Maintenance Log...
Page 88: ...1645 Lemonwood Drive Santa Paula CA 93060 USA 2019 BendPak Inc All rights reserved bendpak com...
