Operation
B) Connect to the First set of Bluetooth headphone
1.
Make your headphone goes to pairing mode first . ( Please refer to your
headphone user’s manual regarding how to go to pairing mode)
2.
After connect the 3.5mm audio cable and the built in usb cable to the TV , the
Ranger Bluetooth Audio 2-way splitter blue led light will start flashing on / off . It will
takes estimate about 10 to 20 secs to auto connect the “pairing” devices. When the
headphone are connected, the Ranger Bluetooth Audio 2-way splitter will show
steady blue led light.
C) Connect to the Second set of Bluetooth headphone
1.
Pair with your second set of Bluetooth headphone.
2.
Make your headphone goes to “pairing” mode also . ( Please refer to your
headphone user’s manual regarding how to go to pairing mode )
3.
Press and hold the “pairing” button on the Ranger Bluetooth Audio 2-way splitter
for about 2 seconds until the blue led light goes off then immediately release your
fingers. The Ranger Bluetooth Audio 2-way splitter blue led light will flash on / off
and start searching for the second bluetooth headphone. At the same time, the
audio on first connected device / headphone will be muted.
4.
When the Ranger Bluetooth Audio 2-way splitter and the second headphone are
connected, the blue led light on the Ranger Bluetooth Audio 2-way splitter will be
permanently on.
5.
If there is no sound coming out from the first connected headphone , please power
off and on the first connected headphone again.
Note:
The Ranger Bluetooth Audio 2-way splitter can connect two Bluetooth A2DP
headphones at the same time . Once paired with devices, the memory function will
remain and reconnect automatically when the Ranger Bluetooth Audio 2-way splitter is
power on. In some scenario, if you want to connect another A2DP device, you need to
reset the Ranger Bluetooth Audio 2-way splitter for new connection.
Reset Method
Press and hold the “pairing” button on the Ranger Bluetooth Audio 2-way splitter for
about 5 seconds , then release it . The Ranger Bluetooth Audio 2-way splitter will clear
up the memory which was paired before and the blue led light on it will go flashing on /
off and start searching for “pairing” A2DP devices nearby.
Notice : The effective operating distance range of the Ranger Bluetooth Audio
2-way splitter is up to 10M ( line of sight ) . Do not block the bluetooth antenna ,
otherwise the operating distance range will be shorter.
3
