RML-600XL ATV / Motorcycle Lift
18
P/N 5900381 — Rev. D — June 2019
Front view. Not necessarily to scale. Many components removed for clarity.
If the Safety Lock Release Handle is engaged on the same Safety Lock on both sides, the Lift is
safe to use. You can now enter the work area.
If the Safety Lock Release Handle is
not
engaged on Safety Locks or is engaged on different
Safety Locks, repeat the procedure to fix the problem or lower the Platform down to the
ground.
Do
not
enter the work area until the Platform is engaged on the same Safety Locks on both
sides; the Lift is not safe to use until you have verified this.
To lower a Vehicle
:
1.
Make sure the Vehicle on the Lift is secure and there are no people or things under or around
the Platform.
Only the Technician should be within 30 feet of the Lift while it is being used.
2.
Use the Raise End of the Air Pump to raise the Safety Lock Release Handle off the Safety Lock it
was engaged on.
Do not raise the Safety Lock Release Handle past the
next
Safety Lock.
3.
Engage the Safety Lock Release Handle on the Latch on the underside of the Platform.
This keeps the Safety Lock Release Handle up and out of the way, which allows the Platform to
lower.
⚠
DANGER
Do
not
manually hold the Safety Lock Release Handle out of the way while you
lower the Platform. Your hand will get caught in the scissor structure and you
will be injured.
4.
Hold down the Lower End of the Air Pump.
The Platform lowers.
5.
When the Platform is fully lowered, continue to hold down the Lower End of the Air Pump for a
couple of seconds, then release it.
6.
Walk
the Vehicle off the Platform.
Do not ride the Vehicle off. Do not stand on the Platform with the Vehicle.
