24
Tighten the fixing screws after you are done with positioning cameras.
Note
If cameras are lowered too low, first adjust the horizontal position, and then bring the
cameras together in the vertical direction.
A small deviation between the right-hand and left-hand cameras in height does not affect
the scan quality, select the middle position between the cameras.
Checking the cameras in a horizontal plane
For the correct operation of the scanner projector beam and optical axis of cameras must be lying in one
plane. This is done through regulating the position of cameras in relation to the projector during scanner
assembly. During transport or other mechanical action the position may alter, leading in some cases to worse
scanning quality. The correctness of the settings is easy to verify by means of a projecting
Cross
after bringing
cameras to a remote object. The horizontal line of the cross still must match the horizontal line of the blue
markings on the view from cameras.
