26
Note
Please note, at the correct location of plate at a distance D the vertical line of cross will match
the central vertical blue line on the view from the cameras. Otherwise, you will notice the
difference in one direction or the other.
Before setting the exposure, adjust sharpness of the lenses.
To do this:
●
turn on the "Black light" projector mode
●
adjust the slider bar in the tool bar to a minimum value of electronic exposure (value 1).
●
open diaphragm of lenses, so that the image from the cameras is at maximum brightness and
not with excessive light.
●
adjust sharpness of camera lenses. This is easy to do by zooming the image, to do this, click
with right mouse button on the view area.