How to Set up Repeater Mode Using
WiFi
REPEATER MODE
1.
Select Repeater mode on the side of the RangeXTD unit.
2.
Plug RangeXTD into the most suitable wall outlet. If the WLAN LED display indicates less
than two bars, you’ll want to try a different spot.
3.
On your computer or device, search for RANGEXTD in your list of available networks and
click connect.
4.
Open your web browser and type 192.168.7.234 in the address bar. Please note, this
address will not work unless you’re properly connected to the RangeXTD.
5.
Enter “admin” as your Password and click Login.
6.
Click on Repeater in the Wizard section located in
the top left-hand corner of your screen.
7.
From the list, choose the WiFi network connection
you wish to extend. You are required to enter your
WiFi password. Click the Apply button.
8.
After the reboot, connect to your new RangeXTD WiFi network.
Summary of Contents for Wi-Fi Booster
Page 1: ...Quick Start Guide ...