16
The harder the pedal was pressed, the faster the machine goes.
3.1.7 Steering mode switch
The machine has 3 steering mode for different purpose as showing on picture 3.1.7, from left to right,
they are:
4 wheel steer--the machine has min. turning radius under this mode
Front wheel steer--it is suitable for normal road driving
Crab steer--the machine can move from one side to the other without turning
Picture 3.1.7
To switch the steering mode:
1. Select the steering mode by turning switch 1
2. When changing steering mode, first make the machine stay at current steering mode, then press
the button 2 (on picture 3.1.7), meantime turning the steering wheel to set the rear wheels to vertical,
after that turn the switch 1 (on picture 3.1.7) to the needed steering mode.
Attention
Changing steering mode must pass through the middle position of switch 1, means you can never turn
the switch 1 from 4 wheel steering directly to crab steering, or the opposite.
If in any case, the wrong operation as mentioned above was done, press the button 2 to release the
rear axle, then follow correct step to set the steering mode.
3.1.8 Reverse camera (optional)
This is optional upon request.
