RANS S-20 RAVEN
TEXT MANUAL
02/17/2017
01K-06
OPTIONAL LOW FUEL WARNING KIT
33.
Become familiar with the Optional Low Fuel Warning Kit on the Header
Tank
Parts Drawings
and collect the parts shown in the drawings.
34.
A 5/8" hole should have been located in the side of the Header Tank. If
not, refer back to
FIGURE 01K-02
and
01K-23
. Replace Silicon Washer
provided with Low Fuel Warning Switch with 5/8" Rubber Washer. Install
Low Fuel Warning Switch into Header Tank. Be sure to orientate the
switch to allow electrical continuity (closed circuit) when installed. Use a
continuity tester (Ohmmeter) to be sure.
Refer to FIGURE 01K-34
. As the
header tank fills with fuel, the switch will open, turning off the LED
Indicator Light.
35.
Install 5/8" Rubber Washer, 5/8" Steel Washer and plastic nut on outside
of tank and tighten. Double check to be sure the switch is orientated
correctly.
36.
Locate LED Indicator Light in instrument panel. Connect to Low Fuel
Warning Switch per
FIGURE 01K-34
. Do not forget to include a proper
sized breaker or fuse.
