RANS S-20 RAVEN
TEXT MANUAL
09/01/2013
03-02
11.
Lower the engine onto the mount between the 912 Engine Attachments.
Bolt on the 912 Engine Attachments using 10mm bolts, Loc Washers and
Loctite. Torque the bolts to 15 to 20 ft. lbs.
IMPORTANT: Completely
remove Rotax installed coolant hose attached to AFT cylinder head
coolant fitting. Install the “S” shaped radiator hoses from aft cylinder head
coolant fittings to lower water pump fittings. The "S" end will attach to the
lower water pump fitting.
The “S” hose prevents coolant hose conflict with
the engine mount. Install on both right and left aft fittings. Trim hose as
required to prevent binding. Refer to
COOLING SYSTEM INSTALLATION
for parts.
12.
Torque bolts through Rubber Washers to 10 to 12 ft. pounds.
