Fluid Flow Capacity:
1000 ml/minute**
Wetted Parts:
Stainless, polyethylene, nylon, acetal polymer
Operating Pressure (Air Spray)
Fluid:
(0-6.9 bar) 0-100 psi
Air:
(0-6.9 bar) 0-100 psi
Ambient Temp.:
40
°
C to 5
°
C (104
°
F to 32
°
F)
Consumption (With Voltage):
438 SLPM (15.4 SCFM) @ 2.8 bar (40 psig) @ Handle Inlet
Sound Level:
92dB (A) @ 2.8 bar (40 psig) Inlet, 1m from applicator
Applicator Length:
273mm (10.75-inches)
Weight: (Without Hose)
620 grams (22 oz.)
Hose 79727-XX Lengths (Std):
10m, 15m, 20m, and 30m
Operating Voltage:
65kV DC (-) maximum
Current Output:
120 microamperes maximum
Paint Resistance:*
.1 M
W
to
∞
Part Sprayability:
Determine sprayability of part to be coated using 76652, Test Equipment
SPECIFICATIONS
Environmental/Physical
Electrical
Mechanical
80365 RANSFLEX SOLVENTBORNE
*
Use Model No. 76652, Test Equipment
** This reflects the maximum fluid volume the applicator can deliver. The maximum spray volume that can be effectively
atomized depends on fluid rheology, spray technology, and finish quality required.
(See current “Paint, HV & SCI Test Equipment” service manual TE-98-01)
AH-15-01.2
16
Ranflex Applicators
-
INTRODUCTION
