Fluid Flow Capacity:
1000 ml/minute**
Wetted Parts:
Stainless, polyethylene, nylon, acetal polymer
Operating Pressure (Air Spray)
Fluid:
(0-6.9 bar) 0-100 psi
Air:
(0-6.9 bar) 0-100 psi
Ambient Temp.:
40
°
C to 5
°
C (104
°
F to 32
°
F)
Consumption (With Voltage):
438 SLPM (15.4 SCFM) @ 2.8 bar (40 psig) @ Handle Inlet
Sound Level:
92dB (A) @ 2.8 bar (40 psig) Inlet, 1m from applicator
Applicator Length:
254mm (10-inches)
Weight: (Without Hose)
600 grams (21.3 oz.)
Hose 79727-XX Lengths (Std):
10m, 15m, 20m, and 30m
Operating Voltage:
45kV DC (-) maximum
Current Output:
140 microamperes maximum
Paint Resistance:*
.1 M
W
to
∞
Part Sprayability:
Determine sprayability of part to be coated using 76652, Test Equipment
SPECIFICATIONS
Environmental/Physical
Electrical
Mechanical
80345 RANSFLEX SOLVENTBORNE
** This reflects the maximum fluid volume the applicator can deliver. The maximum spray volume that can be effectively
atomized depends on fluid rheology, spray technology, and finish quality required.
*
Use Model No. 76652, Test Equipment
(See current “Paint, HV & SCI Test Equipment” service manual TE-98-01)
AH-15-01.2
15
Ranflex Applicators
-
INTRODUCTION
