SAFETY PRECAUTIONS
Before operating, maintaining or servicing any
Ransburg electrostatic coating system, read and
understand all of the technical and safety litera-
ture for your Ransburg products. This manual
contains information that is important for you to
know and understand. This information relates to
USER SAFETY and PREVENTING EQUIPMENT
PROBLEMS. To help you recognize this informa-
tion, we use the following symbols. Please pay
particular attention to these sections.
A WARNING! States information to alert you
to a situation that might cause serious injury
if instructions are not followed.
A CAUTION! States information that tells how
to prevent damage to equipment or how to
avoid a situation that might cause minor injury.
A NOTE is information relevant to the proce-
dure in progress.
While this manual lists standard specifications
and service procedures, some minor deviations
may be found between this literature and your
equipment. Differences in local codes and plant
requirements, material delivery requirements,
etc., make such variations inevitable. Compare
this manual with your system installation drawings
and appropriate Ransburg equipment manuals to
reconcile such differences.
Careful study and continued use of this manual will
provide a better understanding of the equipment
and process, resulting in more efficient operation,
longer trouble-free service and faster, easier trou-
bleshooting. If you do not have the manuals and
safety literature for your Ransburg system, contact
your local Ransburg representative or Ransburg.
SAFETY
The user
MUST
read and be familiar
with the Safety Section in this manual and
the Ransburg safety literature therein iden-
tified.
This hand held device is intended to be
used by trained personnel ONLY.
This manual
MUST
be read and thor-
oughly understood by
ALL
personnel who
operate, clean or maintain this equipment!
Special care should be taken to ensure that
the
WARNINGS
and safety requirements
for operating and servicing the equipment
are followed. The user should be aware of
and adhere to
ALL
local building and fire
codes and ordinances as well as
NFPA-
33 EN 50176 SAFETY STANDARD, or
applicable country safety standards
pri-
or to installing, operating, and/or servicing
this equipment.
W A R N I N G
!
The hazards shown on the following
page may occur during the normal use of
this equipment. Please read the hazard
chart beginning on page 2.
W A R N I N G
!
Vector AA90 Applicators - Safety
1
AH-07-01.10
