RANSOM & RANDOLPH Neycraft Instruction Manual Download

Page: 5 / 7

ANSOM

ANDOLPH

3535 Briarfield Boulevard, PO Box 1570 | Maumee, OH 43537 USA
800.253.4502 | 419.865.9497 | 419.865.9997 (FAX) | www.ransom-randolph.com

Investing with Innovation™

Made in the USA

EYCRAFT

™

DUPLICATING UNIT

Temperature Setting

On the control panel, push the

⑦

SET button. The Display Window will show the holding/constant temperature.

Push

⑤

UP or

⑥

DOWN button to set the desired HIGH/HEAT temperature.

Push the

⑦

SET button again to finalize the setting.

Press the

⑦

SET button again. The Display Window will display the holding/constant temperature.

Push

⑤

UP or

⑥

DOWN button to set the desired melting temperature.

Once you have achieved your desired settings, wait 30 seconds. The machine will automatically revert to the running
screen.

Setting Status

Summary of Contents for Neycraft








Search results

Summary of Contents for Neycraft

Reviews:

Related manuals for Neycraft

Brands by name

Popular brands

RANSOM & RANDOLPH Neycraft, Instruction Manual

Search results

Summary of Contents for Neycraft

Reviews:

Related manuals for Neycraft

Brands by name

Popular brands