GB-FR-NL-28
GB
Fig. 6
OPERATING THE MACHINE
Read the Safety Instructions
CONTROLS
(Fig. 6)
.Cutting Cylinder Drive
this lever (D) positioned at the rear of the
operator, on the right hand side above the
pump gearbox, controls forward and reverse
drive to the cylinders.
To operate:
(a)
Pull the lever forward (F) for forward drive for
grass cutting.
(b)
Push the lever rearward (R) for reverse drive
for backlapping or clearing of cylinders.
(c)
When drive is not required the lever should be
in the neutral (N) position.
TRACTOR CONTROLS
Tractor implement lift
Lifting and lowering of the complete machine is
carried out by operation of the lift and lower
lever on the tractor which must be pushed fully
down for grass cutting.
1.
Before cutting, set the following:
(a) Tractor hydraulic control system
Ford Tractor
Set the position/draft selector in the uppermost
position. Set the flow control valve to slow.
Set the auxiliary services three positions
control knob to the fully IN position to give
hydraulic power to the lifting arms only.
Massey Furguson Tractor
Set the draft lever at the top of its quadrant in
the up position and lock it with its adjustable
stop. Adjust the response lever to slow.
Summary of Contents for Mounted 214 LH Series
