background image

5

Visit us at 

www.rapala.ca

Operator's Manual

RAPALA

®

 

Power Ice Auger

• 

Never operate the engine without the muffler guard in 

place.

• 

Always make sure the exhaust pipe is free of foreign  

objects.

• 

The engine exhaust becomes very hot during operation.  

Keep engine at least three feet away from buildings and 

other equipment during operation.  

• 

Wear appropriate clothing such as a long-sleeved shirt or 

jacket. Also wear long trousers or slacks. Do not wear open 

shoes, and never operate the machine with bare feet. 

• 

Do not wear loose clothing or jewelry. They can get caught in 

moving parts.  Always keep hands, feet, hair and loose clothing 

away from any moving parts on engine and machine.

Gasoline fires and Handling fuel Safely
Use extra care in handling gasoline and other fuels. They are 

flammable and vapors are explosive.

• 

Never fill your fuel tank with fuel indoors. (Examples include: 

basement, garage, barn, shed, house, porch, ice shelter, etc.)

• 

When storing extra fuel be sure that it is in an appropriate 

container and away from any fire hazards.

• 

prevent fire and explosion caused by static electric discharge. 

Use only nonmetal, portable fuel containers approved by the 

Underwriter’s Laboratory (U.L.) or the American Society for 

Testing & Materials (ASTM).

• 

Always fill fuel tank outside in a well ventilated area. Never 

fill your fuel tank with fuel indoors. (Examples include: 

basement, garage, barn, shed, house, porch, etc.) Never 

fill tank near appliances with pilot lights, heaters, or other 

ignition sources.  If the fuel has to be drained, this should be 

done outdoors and with the proper equipment. Do not pour 

fuel from fuel tank. The drained fuel should be stored in a 

container specifically designed for fuel storage or it should 

be disposed of carefully.

• 

Never remove the fuel cap or add fuel with the engine 

running. Stop engine and allow to cool before removing the 

fuel cap/and or refilling the engine.

• 

Do not smoke near or while handling engine fuel.

• 

Never drain fuel from engine in an enclosed area.

• 

Always wipe up excess (spilled) fuel from engine before 

starting. Clean up spilled fuel immediately.  If fuel is spilled, 

do not start the engine but move product and fuel container 

away from the area. Clean up spilled fuel and allow to 

evaporate and dry after wiping and before starting.

• 

Allow fuel fumes/vapors to escape from the area before 

starting engine.

• 

Test the fuel cap for proper installation before starting and 

using engine.  

• 

Always run the engine with fuel cap properly installed on 

the engine.

• 

Never smoke while refilling engine fuel tank.

• 

Do not store engine with fuel in fuel tank indoors. Fuel and 

fuel vapors are highly explosive. 

• 

During storage, tightly screw down fuel cap.

• 

Never pour fuel from engine fuel tank. 

• 

Never siphon fuel by mouth to drain fuel tank.

• 

Always have an adult fill the fuel tank and never allow 

children to fill the engine.

• 

Never allow an adult or anyone under the influence of drugs 

or alcohol to fill engine.

• 

When storing gasoline or equipment with fuel in the tank, 

store away from furnaces, stoves, water heaters or other 

appliances that have a pilot light or other ignition source 

because they can ignite gasoline vapors.  

BURNS AND fIRES

The muffler, muffler guard and other parts of the engine  

become extremely hot during the operation of the engine. 

These parts remain extremely hot after the engine has stopped.
Prevention of Burns and fires
•  Never remove the muffler guard from the engine.

•  Never touch the muffler guard because it is extremely hot 

and will cause severe burns.

•  Never  touch  parts  of  the  engine  that  become  hot  after 

operation.

•  Always keep materials and debris away from muffler guard 

and other hot parts of the engine to avoid fires.

SERVICE

•    Always stop the engine whenever you leave the equipment, 

before cleaning, repairing or inspecting the unit.  Engine 

should be turned off and cool, spark plug wire must be 

removed from spark plug before any repairs or adjustments 

are attempted. Never make adjustments or repairs with the 

engine (motor) running. Disconnect the spark plug wire, 

and keep the wire away from the plug to prevent accidental 

starting. 

•    Always wear eye protection when you make adjustments or 

repairs.

•    Keep all nuts and bolts tight and keep equipment in good 

condition. 

•    Never tamper with safety devices. Check their proper 

operation regularly.  

(SERVICE, continued on page 6)

Summary of Contents for VORTEX















Reviews: