Specification meter specifications
Storage conditions-------------------------------------------------------------------------
Memory Capacity--------------------------------------------------------------------------
Measurement Unit-------------------------------------------------------------------------
Display---------------------------------------------------------------------------------------
Reaction Time------------------------------------------------------------------------------
Meter dimensions-------------------------------------------------------------------------
Meter Weight-------------------------------------------------------------------------------
Measuring range--------------------------------------------------------------------------
Power supply-------------------------------------------------------------------------------
Battery Lifetime----------------------------------------------------------------------------
Temperature 14°~122°F (-10°~+50°C) Humidity Rh
≤
80%
960 test results with respective dates and times
Either S.I unit (MMol/L ir mg/dl
(can be blocked by your choice)
LCD display
6 Seconds
54x93x16 mm
53g with battery
10-750 mg/dL (0.6-41.7 mmol/L)
One 3V lithium battery (CR2032)
Over 1,000 tests
Strip Size----------------------------------------------------------------------------------------
Storage Conditions--------------------------------------------------------------------------
Blood Volume (min)-------------------------------------------------------------------------
Expiry of Test Strips
35x6x0.6 mm
Temperature 36~86°F (2~30°C) Humidity Rh
≤
80%
0.6 µL
Either 18 months from production or 120 days after first opening
Test Strip Specifications
Test Strips -------------------------------------------------------------------------------------
Operation Conditions------------------------------------------------------------------------
Sample Type ----------------------------------------------------------------------------------
HCT of Tested Blood ------------------------------------------------------------------------
Altitude Limit ---------------------------------------------------------------------------------
AP-Plus
Temperature 50°~104°F (10°~40°C) Humidity Rh
≤
20-80%
Capillary and venous blood
20%~60%
To be used no higher than 10183 feet above sea level
System Operation Conditions
LCD Display
show blood glucose test
results and messages
Date----------------------
month/date
Test Result
-------------
Main Button
Press to recall--------
the mechins
Current
Time
----------------
Current
Indication Point./--------------------------
Reaction Zone
The blood drop will
be automatically
drown in and hit the
inaction point above
the reaction zone
Applied Point
Touch a blood or control solution
drop to the edge. not the top of
the applied point
Block colored bars
Insert this and with black
bars facing up into the
test strip slot
1. Insert test strip
2. Insert code card
Slot
Setting Button
On setting mode:
to adjust settings
Current
Temperature
Unit of
Test Result
mmol/L or mg/dL
(selectable)
Time
hr/min
AP Plus
+
blood glucose
monitoring system
®
Easy
4
steps
Caring for your health
1
2
3
4
Secont
Blood Glucose Monitoring System
2. Insert test strip
4. Result in
3. Apply blood
sample
1. Install lancet
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
www.rapiddiagnostic.in
