Inner Container
6. Exchanging the Inner Container
•
•
•
•
•
•
•
•
•
•
•
•
Put on protective gloves.
Disconnect the machine‘s power supply.
Open the drawer. By using Allen key, loosen and
remove the fastening screws on the left and right
sides between the drawer and housing.
Lift the machine‘s lid and completely open it.
Loosen and remove the two fastening screws in
the housing of the activated carbon filters.
Disconnect the plug at the backside of the
carbon filter housing.
Carefully cut off the cable-tie on the cleaning
medium hose and the inner container‘s inlet/
outlet.
Pull the hose from the container‘s inlet/outlet.
Loosen and remove the four fastening screws
from the top of the inner container.
Remove the container from the machine.
Insert a new container and fix it with the four
fastening screws.
Place the cleaning medium hose over the
container‘s inlet/outlet and fix it securely with a
cable-tie.
Put the carbon filter housing back in position and
fix the housing with the two screws. Reconnect
the plug at the housing‘s back.
Close the machine‘s lid and fasten it firmly to the
housing by using the fastening screws. Close the
drawer afterwards.
•
•
5
