Please read these instructions before using the Duax stapler. After reading, keep instructions in a
handy location for future reference.
Loading the Rapid DUAX stapler
Always use DUAX® staples! Duax staples are specially designed for use with the
Rapid Duax stapler.
1. Press the orange button on the top of the stapler to open the magazine.
2. Load the magazine with a strip of Duax staples. Then close the magazine until it locks into position.
See illustration.
Stapling
Adjust the paper guide to the required position, then secure the lock to keep the guide in place.
Place the stack of papers between the anvil and the magazine. Align the stack to the desired stapling
positioning.
Be sure to push the handle all the way. Because 3 stapling stages take place during this motion, it is
important to push the handle completely down to complete the process. Not doing so may result in
the staple becoming jammed – If this happens, see “Clearing a staple jam” section.
3-Stage Stapling Process:
1. Staple penetration.
2 Staple cut-off to suit thickness of paper pile.
3. Flat clinching of staple against back of pile.
See illustration.
2
INSTRUCTIONS FOR USE
Rapid DUAX® stapler
