DHCP Connect:
If you want the Player connect to a DHCP network, you need to directly connect with Player first and
change the networking setting of the Player:
1.
Connect the LAN cable to LAN-1 to use a DHCP connection
2.
Click SystemConfig on the main page of Player, then click Network config Tab.
3.
Double-click textbox of DHCP and make sure DHCP is turned on, then Click Apply.
4.
Click Power tab, and click Reboot button to reboot the Player.
5.
After reboot, the Player IP address will be displayed on the boot screen.
Example:
Change the RS-400 into the diagram below:
AP / Router / Switch
