Connecting to a network (PC/NAS/Internet connection)
CAUTION
•
For details on Internet connection, refer to the owner’s manuals
of your network devices.
•
If you are using a router that supports DHCP, you do not need to
configure any network settings for the unit.
•
Wired connections are recommended for devices other than the
mobile to ensure high sound quality.
•
Some security software installed on your PC or the firewall
settings of network devices (such as a router) may block the
access of the unit to the network devices or the Internet. In this
case, change the setting of the security software or network
devices.
•
When setting the subnet manually, each server must be
connected to the same subnet as the unit .wearing headphones,
do not connect or disconnect them, turn the unit on or off, or
switch the headphone amp gain. Doing so could result in a
sudden loud noise that could harm your hearing. Always set the
amplifier volume to minimum before connecting and un
connecting headphones on. (Left rotating end is minimum
volume) To prevent hearing loss, do not raise the volume level
excessively when using headphones.
Connecting to a network
(PC/NAS/Internet connection)
You can play back music files stored on your PC or NAS, audio
contents on the Internet radio, by connecting this unit to
a network.
Connect with a commercially available STP (shielded twisted pair)
network cable (CAT-5 or higher, straight-through)
Network cable
Broadband router
Modem
Internet
