OWL 640 N/USER MANUAL/03-20/REV1.0
10.3 Pre-made Configuration File
Raptor can supply a premade configuration file that has already been created, with all
important controls extracted from the device property browser (section 10.4) to the main
Micro-Manager window. To obtain this, please contact Raptor or your local distributor.
When the Owl 640 N configuration file has been obtained (Owl 640 N.cfg), it will have to be
stored in the Micro-Manager folder to access it. If the Micro-Manager download was stored
in the default section, the configuration file should be stored in the same location:
C:\Program Files\Micro-Manager-1.4\Owl 640 N.cfg
If the software download was stored in a different location during installation, then the
configuration file should be stored there.
After performing this process and loading Micro-Manager, the Owl 640 N.cfg file should be
listed in the dropdown box of the Start-up Configuration window, as seen from Figure 26.
Select this file and click
“Ok”.
Figure 26: Start-up Configuration – Falcon III.
