CHARGING
The Raptor E5 can be charged in multiple ways:
The rugged connector on the E5 allows for rugged, drop in charging with the E5 cradle. The
cradle will charge a device and spare battery at the same time.
How to charge your device using a cradle charger:
Step 1:
Ensure there is nothing obstructing the connector on the device and pins on the cradle.
Step 2:
Plug the barrel connector cable, supplied with the cradle kit into the connector at the back of
the cradle, ensureing the other side is plugged into the supplied USB power supply.
Step 3:
Slide the E5 device carefully into the cradle until you see the charge light or can see the battery
icon change to the charging indicator.
Please note:
Only the supplied power units and cables must be used. Third party accessories have
not been tested with Raptor devices and could cause electrical and physical harm to the connectors
and the device.