Maintenance
Trouble Shooting
PROBLEM
CAUSE
SOLUTION
The device does
not turn on
The batteries have
insufficient power
The device may have
incorrect batteries
inserted
Please refer to
“Error signals” above
Please refer to
“Error signals” above
Insert Alkaline
AAA batteries
Change the batteries
Error code shows
on display
ERROR SIGNALS
The following error signals may appear on the LCD display of your tool:
8
9
ERROR #
EXPLANATIONS
ACTION
301
401
Beam is moved too fast
The object is out of range
Received signal too weak /
Measurement time too long
Received signal too strong
(target too reflective)
Ambient light is too strong
The temperature is too high
or too low
Change target surface
(e.g. white paper)
Change target surface
(e.g. white paper)
Let the tool to restore to
operating temperature range
Contact customer service
Hardware malfunction
Move slowly
Change target
Shadow target area
-----
This compact laser measuring tool has been designed to be a
low-maintenance tool. However, in order to maintain its performance,
you must always follow these simple directions:
1.
Avoid
exposing the tool to shock, continuous vibration or extreme hot
or cold temperature.
2.
Always
store the tool indoors.
3.
Always
keep the tool free of dust and liquids. Use only a clean soft
cloth for cleaning. If necessary, slightly moisten the cloths with pure
alcohol or a little water.
4.
Do not
disassemble the compact laser measuring tool, this will
expose the user to hazardous radiation exposure.
5.
Do not
attempt to change any part of the laser lens.
a) Press the ON/M button to turn on the tool.
b) Press the ON/M again and keep HOLD status to move the cursor to
the continuous measurement indicator.
c) Aim the laser at the target to which you want to measure. Press
ON/M button to stop the continuous measurement. Press the ON/M
button again to make a new measurement.
Address:
Wolseley UK, CV31 3HH
Customer Services:
0344 292 7060
Website:
www.raptortool.co.uk
