Chapter 15: Advanced Administration
289
To restart a device:
restartdevice <[-id <device_id>] | [host]>
To restore a device configuration:
restoredevice <[-host <host>] | [-id <device_id>]>
[backup_id]
To shutdown CC-SG:
shutdowncc minutes [message]
To open an SSH connection to an SX device:
ssh [-e <escape_char>] <[-id <device_id>] | [host]>
To change a user:
su [-u <user_name>]
To upgrade a device's firmware:
upgradedevice <[-id <device_id>] | [host]>
To list all current users:
userlist
To exit the SSH session:
exit
Command Tips
For commands that pass an IP address, such as
upgradedevice,
you can substitute the hostname for an IP address. See
Terminology/Acronyms
(on page 2) for hostname rules.
The
copydevice
and
restartdevice
commands apply only to
some Raritan devices. Dominion SX and IPMI servers are not
supported by these commands.
Parts of a command in square brackets are optional. You do not
have to use that part of the command.
Some commands contains two segments separated by the "Or" sign:
|
You must enter one of the listed parts of the command, but not both.
Parts of a command in angle brackets show the text that you must
type. Do not type the angle brackets. For example:
