Chapter 6: Devices, Device Groups, and Ports
62
3. Click the Access Application drop-down menu and select the
application you want to use when you connect to this port from the
list. To allow CC-SG to automatically select the correct application
based on your browser, select Auto-Detect.
4. Click OK to save your changes.
To edit a KSX2 or KSX serial port's settings, such as baud rate,
flow control, or parity/data bits:
1. Click the Devices tab and select the serial port you want to edit, or
just select the device that contains the port you want to edit.
2. Choose Devices > Device Manager > Launch Admin. The device's
administrative page opens.
3. Click Port Configuration.
4. Click the serial port you want to edit.
5. Edit the port settings.
6. Click OK to save your changes. Close the administrative page and
return to CC-SG.
To edit an SX serial port's settings, such as baud rate, flow
control, or parity/data bits:
1. Click the Devices tab and select a port you want to edit. The Port
Profile page opens.
2. Edit the port settings.
3. Click OK to save your changes.
Deleting a Port
Delete a port to remove the port entry from a Device. When a port is
down, the information in the Port Profile screen is read-only. You can
delete a port that is down.
Important: If you delete a port that is associated with a node, the
associated out-of-band KVM or Serial interface provided by the port
will be removed from the node. If the node has no other interfaces,
the node will also be removed from CC-SG.
To delete a port:
1. Click the Devices tab and select a device whose ports you want to
delete.
2. Choose Devices > Port Manager > Delete Ports.
