Chapter 5: Using the Web Interface
105
Enabling User Blocking
User blocking determines how many times a user can attempt to log in to
the Dominion PX and fail authentication before the user's login is blocked.
To enable user blocking:
1. Choose Device Settings > Security. The Security Settings page
opens. Go to the User Blocking panel.
2. Type a number in the "Maximum number of failed logins" field. This is
the maximum number of failed logins the user is permitted before the
user's login is blocked from accessing the Dominion PX device. If no
number is entered, there is no limit on failed logins.
3. Type a number in the Block Time field. This is the length of time in
minutes the login is blocked. If no number is entered, there is no time
limit on blocking the login.
4. Click Apply. The user blocking limits are applied.
Enabling Login Limitations
Login limitations determine whether more than one person can use the
same login name at the same time, and whether users are required to
change passwords at regular intervals.
To enable login limitations:
1. Choose Device Settings > Security. The Security Settings page
opens. Go to the Login Limitations panel.