Appendix D: Integration
214
Naming the Rack PDU in the KX II or LX (Port Page for Power Strips)
Note: PX rack PDUs (power strips) can be named in the PX as well as in
KX II and LX.
Once a Raritan remote rack PDU is connected to the KX II or LX, it will
appear on the Port Configuration page. Click on the power port name on
that page to access it. The Type and the Name fields are prepopulated.
Note: The (CIM) Type cannot be changed.
The following information is displayed for each outlet on the rack PDU:
[Outlet] Number, Name, and Port Association.
Use this page to name the rack PDU and its outlets. Names can be up to
32 alphanumeric characters and can include special characters.
Note: When a rack PDU is associated with a target server (port), the outlet
name is replaced by the target server name, even if you assigned another
name to the outlet.
To name the rack PDU and outlets:
Note: CommandCenter Secure Gateway does not recognize rack PDU
names containing spaces.
1. Enter the Name of the rack PDU (if needed).
2. Change the [Outlet] Name if desired. (Outlet names default to the
outlet #.)
