Chapter 2: Rack-Mounting the PDU
8
Mounting Zero U Models Using L-Brackets
If your PDU has circuit breakers implemented, read
Circuit Breaker
Orientation Limitation
(on page 6) before mounting it.
To mount Zero U models using L-brackets:
1. Align the baseplates on the rear of the Dominion PX device.
2. Secure the baseplates in place. Different models ship with different
types of baseplates.
To secure a baseplate with the thumbscrew, turn the thumbscrew
until it is tightened.
To secure a baseplate without the thumbscrew, use the included
L-shaped hex key to loosen the hex socket screws until the
baseplate is fastened.
