Appendix D: Integration
218
Connecting the Power Strip
1. Connect the male RJ-45 of the P2CIM-PWR to the female RJ-45
connector on the serial port power strip.
2. Connect the female RJ-45 connector of the P2CIM-PWR to any of the
available female system port connectors on the Dominion KX using a
straight through Cat 5 cable.
3. Power on the power strip.
4. Power on the device.
Configuring the Power Strip
Once the power strip has been added, Dominion KX Manager will
automatically recognize that it is connected. The Device Tree in the left
panel of the window will change the appropriate target icon to indicate that
a power strip is connected to that port.
1. Select the power strip icon, right-click on it, and then click Properties.
When the Power Strip Properties dialog appears, type a name for the
new power strip and click OK.
2. In the Devices Tree, select the target server(s) powered through the
power strip. Right-click on the server icon and click Properties. The
PC Properties window appears.
3. Click on one of the Power Strip rows in the table and a list of available
power strips connected to the Dominion KX appears. Click on the
appropriate power strip.