Chapter 6: SX II Administration
129
4. Complete the following fields for SNMP v1/v2c (as needed):
Destination IP/Hostname - the IP or hostname of the SNMP
destination. Up to five (5) SNMP trap destinations can be
created.
Note: IPv6 addresses cannot exceed 80 characters in length for the
host name.
Port Number - the port number used by the SNMP manager.
Community - the appliance's community string.
Note: An SNMP community is the group to which appliances and
management stations running SNMP belong. It helps define where
information is sent. The community name is used to identify the
group. The SNMP device or agent may belong to more than one
SNMP community.
5. Complete the following fields for SNMP v3 (as needed):
Destination IP/Hostname - the IP or hostname of the SNMP
destination. Up to five (5) SNMP destinations can be created.
Note: IPv6 addresses cannot exceed 80 characters in length for the
host name.
Port Number - the port number used by the SNMP manager.
Security Name - the username or service account name of the
entity communicating with the SNMP agent.
Authentication Protocol - the MD5 or SHA authentication protocol
used by the SNMP v3 agent.
Authentication Passphrase - the pass phrase required to access
the SNMP v3 agent.
Privacy Protocol - if applicable, the AES or DES algorithm used
to encrypt PDU and context data.
Privacy Passphrase - if applicable, the pass phrase used to
access the privacy protocol algorithm.
6. Click OK to create the SNMP trap destinations.
Summary of Contents for Dominion SX II
