8
USTIP
U
SER
G
UIDE
Physical Connections
Figure 5 P2-USTIP2 Rear Panel Connections
Attaching a Local Console for Initial Configuration
1.
Attach the included AC power cord to the USTIP unit and plug the other end into a nearby
AC power outlet.
2.
Connect the client PC to the USTIP ADMIN Port using a serial (DB9) cable.
3.
Connect a standard Ethernet cable from the Network Port to an Ethernet switch, hub, or
router.
4.
On a USTIP1 unit, connect the single Paragon port to the User port on your UMT unit using a
CAT5 cable. On a USTIP2 unit, connect both the upper and the lower Paragon ports to User
ports on your UMT unit using CAT5 cables. The upper Paragon port allows you to download
the Paragon database to the USTIP unit, and the lower Paragon port allows local access to the
Paragon unit.
5.
Launch a Hyperterminal session from the client PC. To access the Serial Admin Port, use
HyperTerminal to configure specific settings with the following steps:
A.
In Windows, click on the
Start
menu in the lower left corner, then click
Programs
Æ
Accessories
Æ
Communications
Æ
HyperTerminal
to start a session.
B.
Name the HyperTerminal session, select a session icon - if required - and then click
OK.
C.
In the
Connect To
window, click on the
Connect Using
drop-down arrow and select
COM1
(or other option, depending on where your PC's serial cable is connected) and
click
OK.
D.
In the
COM1 Properties
window, click on the
Port Settings
tab. Make sure the
Bits per
second
drop-down is
115200
and
Flow control
drop-down is set to
NONE.
Click
OK.
E.
On the
File
menu, click
Properties
; click on the
Settings
tab, then click on the
Emulation
drop-down arrow and select
VT100.
i.
Click
ASCII Setup
and ensure that the checkbox before
Wrap lines that exceed
terminal width
is checked.
ii.
Click
OK.
iii.
Click
Terminal Setup
and ensure that the checkbox before
Keypad application
mode
is checked.
iv.
Click
OK.
6.
Power ON USTIP.
Summary of Contents for P2-USTIP1
Page 2: ...This page intentionally left blank...
Page 22: ...16 USTIP USER GUIDE...
Page 40: ...34 USTIP USER GUIDE...
