20
USTIP
U
SER
G
UIDE
Subnet Mask
: Enter a Subnet Mask provided by your Network
Administrator.
Default Gateway
: Enter the Default Gateway if your Network Administrator
specifies one.
•
Enable Modem Interface:
Enables Dial-up Modem access (default: YES). For USTIP, an
external serial modem must be connected in order for this function to work properly.
•
Enable Web Browser Interface
: Enables web browser access to USTIP (default: YES).
•
Use Default TCP Port 5000
:
−
YES
(default): Utilizes the default port 5000.
−
NO
: Enter an alternate port number.
Note: In order to access USTIP from beyond a firewall, your firewall settings must enable two-
way communication through the default port 5000, or the non-default port configured above.
User Station Options
Select
[U] User Station Options
on the Configuration Menu to configure the User Station. In the
User Station Configuration screen, use the
Å
and
Æ
arrows on your keyboard to set
Port
Priority
to favor
None, Remote
, or
Local
users.
On the P2-USTIP1 model,
•
If you set Port Priority to
Remote,
a Remote user will be prompted to terminate the Local
user session when attempting to connect to the same USTIP unit.
•
If you set Port Priority to
Local,
a Local user automatically terminates a Remote user session
when attempting to connect to the same USTIP unit.
•
If you set Port Priority to
None,
there is no capability to automatically terminate a user
session. Instead, the first user to connect to a port, regardless of Remote or Local status,
maintains access to that port until that user terminates the session. Other users attempting to
connect will be notified that the port is busy.
Figure 15 USTIP UserStation Configuration Screen
On the P2-USTIP2 model, two ports are available for connection. The second port will always be
used before the first port, leaving the first free until another user attempts to connect.
•
If you set Port Priority to
Remote,
the first Remote user connects to port 2, and if a second
Remote user attempts to connect and there is a Local user on port 1, the second Remote user
is prompted to terminate the Local user’s session.
•
If you set Port Priority to
Local,
a Local user automatically terminates a Remote user session
(if Remote users are on both ports, the second port connection is terminated).
Summary of Contents for P2-USTIP1
Page 2: ...This page intentionally left blank...
Page 22: ...16 USTIP USER GUIDE...
Page 40: ...34 USTIP USER GUIDE...
