Appendix C: Configuration or Firmware Upgrade with a USB Drive
553
If the specified firmware file is the same as the current firmware
version of your PX3, no firmware upgrade is performed unless you
have set the option "force_update" to
true
.
force_update
If this option is set to
true
, the firmware upgrade is always
performed even though your PX3 is running the same firmware
version as the specified firmware file.
This option CANNOT break other constraints like the minimum
downgrade version.
config
Supported as of release 2.4.0.
Specify the name of the configuration file containing device settings.
The suggested filename is
config.txt. See
config.txt
(on page 555).
device_list
Specify the name of the configuration file listing all PX3 devices to
configure and their device-specific settings.
This file is required if any macros are used in the device
configuration file "config.txt."
The suggested filename is
devices.csv. See
devices.csv
(on page
match
Specify a match condition for identifying a line or a PX3 device in the
device configuration file "devices.csv."
The option's value comprises one word and one number as explained
below:
The word prior to the colon is an identification property, which is
either
serial
for serial number or
mac
for MAC address.
The number following the colon indicates a column in the
devices.csv file.
For example,
mac:7
instructs the PX3 to search for the MAC address
in the 7th column of the "devices.csv" file.
Summary of Contents for PX3-1000 series
