Chapter 6: Using the Web Interface
236
Port Forwarding Examples
To access a cascaded device in the Port Forwarding mode, assign a port
number to the IP address.
Master device: Assign proper 5NNXX port numbers or standard
TCP/UDP ports. See
Port Number Syntax
(on page 234) for details.
Slave device: Assign proper 5NNXX port numbers.
Assumption:
The Port Forwarding mode is applied to a USB-cascading
configuration comprising three Raritan devices. The IP address is
192.168.84.77.
Master device:
Position code for the master device is '00' so each port number is 5NN00
as listed below.
Protocols
Port numbers
HTTPS 50000
HTTP 50100
SSH 50200
TELNET 50300
SNMP 50500
MODBUS 50600
Examples using "5NN00" ports:
To access the master device via HTTPS, the IP address is:
https://192.168.84.77:50000/
To access the master device via HTTP, the IP address is:
http://192.168.84.77:50100/
To access the master device via SSH, the command is:
ssh -p 50200 192.168.84.77
Examples using standard TCP/UDP ports:
To access the master device via HTTPS, the IP address is:
https://192.168.84.77:443/
To access the master device via HTTP, the IP address is:
http://192.168.84.77:80/
To access the master device via SSH, the command is:
ssh -p 22 192.168.84.77
Summary of Contents for PX3-1000 series
