background image

Appendix I: Updating the LDAP Schema 
 

632

 

 
 

6.

 

Choose rciusergroup from the Select Schema Object list. 

 

7.

 

Click OK in the Select Schema Object dialog. 

8.

 

Click OK in the User Properties dialog. 

 

Updating the Schema Cache 

 

To update the schema cache: 

1.

 

Right-click Active Directory

®

 Schema in the left pane of the window 

and select Reload the Schema. 

2.

 

Minimize the Active Directory Schema MMC (Microsoft

®

 Management 

Console) console. 

 

Editing rciusergroup Attributes for User Members 

To run the Active Directory

®

 script on a Windows 2003

®

 server, use the 

script provided by Microsoft

®

 (available on the Windows 2003 server 

installation CD). These scripts are loaded onto your system with a 
Microsoft

®

 Windows 2003 installation. ADSI (Active Directory Service 

Interface) acts as a low-level editor for Active Directory, allowing you to 
perform common administrative tasks such as adding, deleting, and 
moving objects with a directory service. 

 

To edit the individual user attributes within the group 

rciusergroup: 

1.

 

From the installation CD, choose Support > Tools. 

2.

 

Double-click SUPTOOLS.MSI to install the support tools. 

Summary of Contents for PX3-1000 series









































































































































































































































































































































































































































































































































































































































































































































































Reviews: