Chapter 6: Using the Web Interface
203
4. In the "Power off period during power cycle" field, click the
drop-down arrow and select an option from the list. Valid range is
zero second to one hour.
Time units in the list are explained below:
s: second(s)
min: minute(s)
h: hour(s)
To make the outlet's power-off period identical to the
PDU-defined setting, select the "PDU defined" option. See
Changing the PDU-Defined Cycling Power-Off Period
(on
page 201).
Tip: The information in parentheses following the option "PDU
defined" indicates the current PDU-defined selection.
You can also type a value if the desired time is not listed. For
example, type "15 s" for 15 seconds.
5. Click OK.
Setting the Initialization Delay
This section applies to outlet-switching capable models only.
The outlet initialization delay determines how long the PX device waits
before providing power to all outlets during power cycling or after
recovering from a temporary power loss. This is useful in cases where
power may not initially be stable after being restored, or when UPS
batteries may be charging.
To set the initialization delay for all outlets:
1. Click the PDU folder.
Note: The folder is named "my PX" by default. The name can be
customized.
2. Click Setup in the Settings section. The Pdu Setup dialog appears.
3. In the "Outlet initialization delay on device startup" field, click the
drop-down arrow and select an option from the list. Valid range is 1
second to 1 hour.
Time units in the list are explained below:
s: second(s)
min: minute(s)
h: hour(s)
Summary of Contents for PX3-4000 series
