Chapter 6: Using the Web Interface
275
a. In the "Number of successful pings to enable feature" field, type
3.
b. In the "Wait time (in seconds) after successful ping" field, type 5.
6. To make the PX declare the inaccessibility of the monitored PDU
when that PDU becomes inaccessible for around 12 seconds (4
pings * 3 seconds), do the following:
a. In the "Number of consecutive unsuccessful pings for failure"
field, type 4.
b. In the "Wait time (in seconds) after unsuccessful ping" field, type
3.
7. In the "Wait time (in seconds) before resuming pinging" field, type 60
to make the PX stops pinging the target PDU for 60 seconds (1
minute) after the PDU inaccessibility is declared. After 60 seconds,
the PX will re-ping the target PDU.
Step 2: Create an event rule to send SNMP notifications for this
PDU
1. Choose Device Settings > Event Rules. The Event Rule Settings
dialog appears.
2. Click New.
3. In the "Rule name" field, type "Send SNMP notifications for PDU
(192.168.84.95) inaccessibility."
4. Select the Enabled checkbox to enable this new rule.
5. In the Event field, choose Server Monitoring > 192.168.84.95 >
Unreachable.
6. In the "Trigger condition" field, select the Unreachable radio button.
This makes the PX react only when the target PDU becomes
inaccessible.
7. Select the System SNMP Notification Action from the "Available
actions" list box, and click
to add it to the "Selected actions" list
box.
Note: If you have not configured the System SNMP Notification Action to
specify the SNMP destination(s), see
Configuring SNMP Notifications
(on page 332).
Summary of Contents for PX3-4000 series
