Chapter 3: Installation and Configuration
25
To set
Use this command
EAP CA
certificate
network wireless
eapCACertificate
When prompted to enter the CA
certificate, open the certificate with a
text editor, copy and paste the content
into the communications program.
The content to be copied from the CA certificate does NOT include
the first line containing "BEGIN CERTIFICATE" and the final line
containing "END CERTIFICATE." If a certificate is installed, configure
the following:
Whether to
Use this command
Verify the
certificate
network wireless
enableCertVerification
<option1>
<option1> =
true
or
false
Accept an
expired or not
valid
certificate
network wireless
allowOffTimeRangeCerts
<option2>
<option2> =
true
or
false
Make the
connection
successful by
ignoring the
"incorrect"
system time
network wireless
allowConnectionWithIncorrectC
lock <option3>
<option3> =
true
or
false
d. To determine which IP protocol (IPv4 or IPv6) is enabled and
which IP address (IPv4 or IPv6) returned by the DNS server is
used, configure the following parameters.
To set
Use this command
IP protocol
network ip proto <protocol>
<protocol> =
v4Only
,
v6Only
or
both
Summary of Contents for PX3-4000 series
