Chapter 8: Using the Command Line Interface
481
Specifying the EnergyWise Secret
This command syntax specifies the password (secret) to enter the Cisco
®
EnergyWise domain.
config:#
energywise secret <password>
Variables:
<password> is a string comprising up to 127 ASCII printable
characters. Spaces and asterisks are NOT acceptable.
Changing the UDP Port
This command syntax specifies the UDP port for communications in the
Cisco
®
EnergyWise domain.
config:#
energywise port <port>
Variables:
<port> is the UDP port number ranging between 1 and 65535.
Setting the Polling Interval
This command syntax determines the polling interval at which the Cisco
®
EnergyWise domain queries the PX device.
config:#
energywise polling <timing>
Variables:
<timing> is an integer number in seconds. It ranges between 30 and
600 seconds.
Summary of Contents for PX3-4000 series
