Chapter 4: Connecting External Equipment (Optional)
54
Snapshots or videos captured by the webcam are immediately displayed
in the PX web interface after the connection is complete. See
Viewing
Webcam Snapshots or Videos
(on page 306).
Connecting a GSM Modem
A Cinterion
®
MC52iT or MC55iT GSM modem can be connected to the
PX in order to send SMS messages containing event information. See
Creating Actions
(on page 223) for more information on SMS
messages.
Note: PX cannot receive SMS messages.
To connect the GSM modem:
1. Connect the GSM modem to the DB9 serial port on the PX.
2. Configure the GSM modem as needed. See the supporting GSM
modem help for information on configuring the GSM modem.
3. Configure the GSM modem settings in PX.
a. Click Device Settings > Serial Port Settings. The Serial Port
Configuration dialog opens.
b. If needed, enter the GSM modem SIM PIN.
Connecting an Analog Modem
The PX supports remote dial-in communications to access the CLI
through an analog modem. This dial-in feature provides an additional
alternative to access the PX when the LAN access is not available. To
dial in to the PX, the remote computer must have a modem connected
and dial the correct phone number.
Below are the analog modems that the PX supports for sure:
NETCOMM IG6000 Industrial Grade SmartModem
US Robotics 56K modem
The PX may also support other analog modems which Raritan did not
test.
Note that the PX does NOT support dial-out or dial-back operations via
the modem.
To connect an analog modem:
1. Plug a telephone cord into the phone jack of the supported modem.
Summary of Contents for PX3-4000 series
