Chapter 8: Using the Command Line Interface
239
Setting the sysLocation Value
This command syntax sets the SNMP MIB-II sysLocation value.
config:#
network services snmp sysLocation <value>
Variables:
<value> is a string comprising 0 to 255 alphanumeric characters.
Changing the Modbus Configuration
You can enable or disable the Modbus agent, configure its read-only
capability, or change its TCP port.
A Modbus command begins with
network services modbus
.
Enabling or Disabling Modbus
This command syntax enables or disables the Modbus protocol.
config:#
network services modbus enabled <option>
Variables:
<option> is one of the options:
true
or
false
.
Option
Description
true
The Modbus agent is enabled.
false
The Modbus agent is disabled.
Enabling or Disabling the Read-Only Mode
This command syntax enables or disables the read-only mode for the
Modbus agent.
config:#
network services modbus readonly <option>
Variables:
<option> is one of the options:
true
or
false
.
Option
Description
true
The read-only mode is enabled.
false
The read-only mode is disabled.
Summary of Contents for PXE
Page 16: ......
Page 339: ...Appendix A Specifications 323 RS 485 Pin signal definition al 4 5 6 D bi direction al Data 7 8...
Page 380: ...Index 364 Z Zero U Products 1...
Page 381: ......