Chapter 6: Using the Web Interface
65
3. To enable the SSH application, select the Enable SSH Access
checkbox. To disable it, deselect the checkbox.
4. To select a different authentication method, select one of the
checkboxes.
Password authentication only: Enables the password-based login
only.
Public key authentication only: Enables the public key-based
login only.
Password and public key authentication: Enables both the
password- and public key-based login. This is the default.
5. Click
OK.
If the public key authentication is selected, you must type a valid SSH
public key for each user profile to log in over the SSH connection. See
Creating a User Profile
Changing Telnet Settings
You can enable or disable the Telnet access to the command line
interface, or change the default TCP port for the Telnet service.
To change Telnet service settings:
1. Choose Device Settings > Network Services > Telnet. The Telnet
Settings dialog appears.
2. To use a different port, type a new port number in the port field. Valid
range is 1 to 65535.
3. To enable the Telnet application, select the Enable Telnet Access
checkbox. To disable it, deselect the checkbox.
4. Click
OK.
Summary of Contents for PXE
Page 16: ......
Page 339: ...Appendix A Specifications 323 RS 485 Pin signal definition al 4 5 6 D bi direction al Data 7 8...
Page 380: ...Index 364 Z Zero U Products 1...
Page 381: ......