Chapter 6: Using the Web Interface
155
Field
Description
Wait time (in
seconds) before
resuming pinging
after failure
The wait time before the PXE resumes
pinging after the monitored equipment is
declared unreachable. Valid range is 1 to
1200 (seconds).
Number of
consecutive failures
before disabling
feature (0 =
unlimited)
The number of times the monitored
equipment is declared unreachable
consecutively before the PXE disables the
ping monitoring feature for the monitored
equipment. Valid range is 0 to 100.
5. Click
OK.
6. To add more IT devices, repeat Steps 2 to 5.
7. Click Close to quit the dialog.
In the beginning, the status of the monitored equipment shows "Waiting
for reliable connection," which means the requested number of
consecutive successful or unsuccessful pings has not reached before the
PXE can declare that the monitored device is reachable or unreachable.
Editing Ping Monitoring Settings
You can edit the ping monitoring settings for any IT device whenever
needed.
To modify the ping monitoring settings for an IT device:
1. Choose Device Settings > Server Reachability. The Server
Reachability dialog appears.
2. Select the IT device whose settings you want to modify.
3. Click Edit or double-click that IT device. The Edit Server 'XXX' dialog
appears, where XXX is the IP address or host name of the IT device.
4. Make changes to the information shown.
5. Click
OK.
Deleting Ping Monitoring Settings
When it is not necessary to monitor the accessibility of any IT device, just
remove it.
To delete ping monitoring settings for an IT device:
1. Choose Device Settings > Server Reachability. The Server
Reachability dialog appears.
2. Select the IT device that you want to remove. To make multiple
selections, press Ctrl+click or Shift+click to highlight multiple ones.
3. Click
Delete.
Summary of Contents for PXE
Page 16: ......
Page 339: ...Appendix A Specifications 323 RS 485 Pin signal definition al 4 5 6 D bi direction al Data 7 8...
Page 380: ...Index 364 Z Zero U Products 1...
Page 381: ......