background image

This document contains proprietary information that is protected by copyright. All rights reserved. No 
part of this document may be photocopied, reproduced, or translated into another language without 
express prior written consent of Raritan, Inc. 

© Copyright 2018 Raritan, Inc. All third-party software and hardware mentioned in this document are 
registered trademarks or trademarks of and are the property of their respective holders. 

FCC Information 

This equipment has been tested and found to comply with the limits for a Class A digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a commercial installation. This equipment generates, uses, and can 
radiate radio frequency energy and if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. Operation of this equipment in a residential 
environment may cause harmful interference. 

VCCI Information (Japan) 

 

Raritan is not responsible for damage to this product resulting from accident, disaster, misuse, 
abuse, non-Raritan modification of the product, or other events outside of Raritan's reasonable 
control or not arising under normal operating conditions. 

If a power cable is included with this product, it must be used exclusively for this product. 

 

 

Summary of Contents for T1700-LED






































Reviews: