Chapter 3: Introduction to the OSD Interface
28
Selection Menu
In addition to the OSD menu's main layout, the Selection Menu provides
additional elements, which are helpful for locating and selecting channels.
Current page
number
The number of current page.
Total of pages
The total number of pages.
Scn
The scan rate in seconds for each channel.
If the channel is connected to a second-tier KVM switch, it shows
dashes (- -) instead.
Name
The channel name that you have specified, if any.
Channel selection
indicator
If you are accessing any channel, the red arrow appears on the OSD to
indicate the channel you are accessing.
Ch. ID
The channel port number.
If sorting the Selection Menu by channel name, the system precedes
each channel port number with the TMCAT17 switch's name.
No
The number that you can press for quickly selecting the desired
channel.
Device name
The name of current TMCAT17 switch whose channels are displayed on
the screen. Factory default is the model name.
Tip: The Selection Menu is sorted by channel number by default, but you
can sort it based on channel names. See
Switching the Channel Sorting
(on page 35).
