Chapter 5: System Settings
56
4. The message "Reset To Default [Y/N/ESC]" appears on the message
bar. Press Y to reset the system, or N or Esc to cancel the reset.
5. When you hear the beep sound and see the login box displayed on the
screen, the system reset is complete.
In a two-tier system, reset the base switch only. Do not reset the
second-tier devices unless necessary. If you reset second-tier devices,
ensure that you
re-programme them
(see "
STEP (A): Programme an
MCCAT Switch as a Second-Tier Device
" on page 87).